| Model | GE6-P4 | GE6-P6 | GE6-T6 | GE4-P4 | GE4-P6 | GE4-T6 |
| W × H × D (mm) | 72 × 36 × 86 | 48 × 48 × 85 |
| Type | Preset | Display | Preset | Display |
| Display digit | 4Digits 2Stages | 6Digits 2Stages | 6Digits 1Stages | 4Digits 2Stages | 6Digits 2Stages | 6Digits 1Stages |
| FND Hight | PV : 11 mm SV : 8 mm | PV : 11 mm SV : 8 mm |
| Function | Out-counter setting & Indication(Exception : Indication) | Out-counter output & constant output |
| PNP / NPN Input selection, built-in switch | Twin timer(On/Off Time separate setting) |
| Dual counter function (CP1+CP2) | Flicker MODE 99.99 sec setting |
| Prescale function | Key Lock function |
| OFFSET setting function(Standard value when reset) | P.V storage function when power off |
| Counting speed & Input | 1 / 30 / 1 K / 10 Kcps, Contact, Non-contact |
| Reset | External reset signal width 0.1 ms / 1 ms / 20 m sec selectable |
| Input type | CP1, CP2, RST, RST.B (TOTAL is exception) 4 Input |
| [H]Level 4 - 30 V d.c [L]Level 0 - 2 V d.c NPN / Internal full-up by PNP setting / full-down resistance connection(4.7 ㏀) |
| Power voltage | 1. 100 V - 240 V d.c / a.c 50 - 60 ㎐(± 10%) |
| 2. 24 V - 60 V d.c / a.c 50 - 60 ㎐(± 10%) |
| Consumption power | About 12 VA(220 V a.c 60 ㎐) |
| Power supply to sensor | +12 V d.c (Voltage fluctuation rate : Max. ±5%) 200 mA Max. |
| Control output | RELAY1 | 1a (250 V a.c 3 A) | - | 1c (250 V a.c 3 A) | - |
| RELAY2 | 1c (250 V a.c 3 A) | | 1c (250 V a.c 3 A) | |
| TR1/TR2 | NPN open collector 30 V d.c 100 mA Max. (Refer to terminal structure) |
| Dielectirc strength | - |
| Ambient temperature & humidity | -10 - 50 ˚C 30 - 85 % R.H. (Without condensation) |
| Protection structure | IP65(Front) |
| Model | GE3-P6 | GE3-T6 | GE7-P6 | GE7-T6 |
| W × H × D (mm) | 96 × 48 × 100 | 72 × 72 × 87 |
| Type | Preset | Display | Preset | Display |
| Display digit | 6Digits 2Stages | 6Digits 1Stages | 6Digits 2Stages | 6Digits 1Stages |
| FND Hight | PV : 13 mm SV : 10 mm | PV : 13 mm SV : 10 mm |
| Function | Out-counter setting & Indication(Exception : Indication) | Out-counter output & constant output |
| PNP / NPN Input selection, built-in switch | Twin timer(On/Off Time separate setting) |
| Dual counter function (CP1+CP2) | Flicker MODE 99.99 sec setting |
| Prescale function | Key Lock function |
| OFFSET setting function(Standard value when reset) | P.V storage function when power off |
| Counting speed & Input | 1 / 30 / 1 K / 10 Kcps, Contact, Non-contact |
| Reset | External reset signal width 0.1 ms / 1 ms / 20 m sec selectable |
| Input type | CP1, CP2, RST, RST.B (TOTAL is exception) 4 Input |
| [H]Level 4 - 30 V d.c [L]Level 0 - 2 V d.c NPN / Internal full-up by PNP setting / full-down resistance connection(4.7 ㏀) |
| Power voltage | 1. 100 V - 240 V d.c / a.c 50 - 60 ㎐(± 10%) |
| 2. 24 V - 60 V d.c / a.c 50 - 60 ㎐(± 10%) |
| Consumption power | About 12 VA(220 V a.c 60 ㎐) |
| Power supply to sensor | +12 V d.c (Voltage fluctuation rate : Max. ±5%) 200 mA Max. |
| Control output | RELAY1 | 1a (250 V a.c 3 A) | - | 1c (250 V a.c 3 A) | - |
| RELAY2 | 1c (250 V a.c 3 A) | | 1c (250 V a.c 3 A) | |
| TR1/TR2 | NPN open collector 30 V d.c 100 mA Max. (Refer to terminal structure) |
| Dielectirc strength | - |
| Ambient temperature & humidity | -10 - 50 ˚C 30 - 85 % R.H. (Without condensation) |
| Protection structure | IP65(Front) |
-
